# Sequencer doesn't start from step 1 in Logic Pro X **URL:** \ **Category:** Uncategorized\ **Created:** [February 18, 2022, 3:11pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189 "2022-02-18T15:11:06Z")\ **Posts on this page:** 17\ **Page:** 1
**Author:** ![jbj](https://avatars.discourse-cdn.com/v4/letter/j/c0e974/32.png) [@jbj](https://forum.audiomodern.com/u/jbj)\ **Post date:** [February 18, 2022, 3:11pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/1 "2022-02-18T15:11:06Z")
Hi! Just started using this in Logic. I can’t get it to start the sequencer at the start of the bar. If I export the sequence as midi it is correct. When I play I in Playbeat it’s early by several steps, but in time. In other sequencers you use a midi note to signal the start of the sequence, tried to use the First step in midi cc settings using a key but it didn’t work. Would be grateful for any advice since it makes it impossible in the context of a project. The best, Johan ---
**Author:** ![Audiomodern](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.audiomodern.com/audiomodern/32/3_2.png) [@Audiomodern](https://forum.audiomodern.com/u/Audiomodern)\ **Post date:** [February 20, 2022, 7:32am UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/2 "2022-02-20T07:32:36Z")
Hello Johan, Thanks for reaching out and sorry to hear that, this shouldn’t happen. As Playbeat is designed to be in Sync with your DAW can you please make sure you start your DAW timeline from Bar 1 or 16 (and so on) so both the bar count & Playbeat start together? Let me know if that works for you. ---
**Author:** ![jbj](https://avatars.discourse-cdn.com/v4/letter/j/c0e974/32.png) [@jbj](https://forum.audiomodern.com/u/jbj)\ **Post date:** [February 20, 2022, 6:41pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/3 "2022-02-20T18:41:44Z")
Thanks, well moving to the start of the project, bar 1 beat 1 it does work. It seems sensitive to start further from that in logic (latest), it seems to loose the connection to the start of the bar for some reason. So, hoping for that to be fixed. A request: To use it as a midi fx in logic, like Riffer. I can do that with Blue Cat’s Patchwork, but it is a bit tedious… To be able to record the midi output, and also use other sound sources. ---
**Author:** ![jbj](https://avatars.discourse-cdn.com/v4/letter/j/c0e974/32.png) [@jbj](https://forum.audiomodern.com/u/jbj)\ **Post date:** [February 20, 2022, 7:36pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/4 "2022-02-20T19:36:06Z")
And while I’m at it. Choke-groups, priority in the randomness, with hihats triggering from different notes it’s very useful. And also, round robins for samples. The best, Johan ---
**Author:** ![Audiomodern](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.audiomodern.com/audiomodern/32/3_2.png) [@Audiomodern](https://forum.audiomodern.com/u/Audiomodern)\ **Post date:** [February 26, 2022, 7:21pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/5 "2022-02-26T19:21:54Z")
Hello again, Thanks for the suggestions, but what happens when you start form Bar 8 or 16. Do you still experience the same problem? About Choke-groups, you can set them up in settings: [![](https://europe1.discourse-cdn.com/flex013/uploads/audiomodern/original/1X/07159c0eecabec433f857e794970a9bdbdd4454b.jpeg "PLAYBEAT 3.0 by Audiomodern | Settings") ](https://www.youtube.com/watch?v=1fcAt4K8sJ8) ---
**Author:** ![jbj](https://avatars.discourse-cdn.com/v4/letter/j/c0e974/32.png) [@jbj](https://forum.audiomodern.com/u/jbj)\ **Post date:** [February 26, 2022, 7:47pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/6 "2022-02-26T19:47:09Z")
Hi, thanks for following up on this. It works 100% when I start from bar 1,8 etc.Great! I was in the middle of a project that didn’t look like that. Sorry for any confusion. About the Linear Group settings, if I use the auto-remix (with the “pads” or just pushing the “button” it doesn’t respect those settings, I get notes triggering at the same time. I can not get a random remix without notes triggering at the same time, even if I set the Linear groups. ---
**Author:** ![Audiomodern](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.audiomodern.com/audiomodern/32/3_2.png) [@Audiomodern](https://forum.audiomodern.com/u/Audiomodern)\ **Post date:** [February 26, 2022, 7:50pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/7 "2022-02-26T19:50:15Z")
Understood. The linear groups are designed to follow after the randomization button has generated a new pattern. We will make sure this behavior is included to our upcoming update. Thank you for your patience. ---
**Author:** ![jbj](https://avatars.discourse-cdn.com/v4/letter/j/c0e974/32.png) [@jbj](https://forum.audiomodern.com/u/jbj)\ **Post date:** [February 26, 2022, 8:03pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/8 "2022-02-26T20:03:46Z")
Thanks, very happy that you take this in consideration. ---
**Author:** ![inkyblackness](https://avatars.discourse-cdn.com/v4/letter/i/8491ac/32.png) [@inkyblackness](https://forum.audiomodern.com/u/inkyblackness)\ **Post date:** [November 2, 2022, 3:08pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/9 "2022-11-02T15:08:23Z")
Hi, I’m getting this intermittent problem too (using Logic 10.7.4). I need it to sync from well into a song but it’s just too unreliable. I read the earlier threads but couldn’t see a solution. Please advise. Thanks and best, IAN ---
**Author:** ![Audiomodern](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.audiomodern.com/audiomodern/32/3_2.png) [@Audiomodern](https://forum.audiomodern.com/u/Audiomodern)\ **Post date:** [November 2, 2022, 3:24pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/10 "2022-11-02T15:24:05Z")
Hello inkyblackness, Which Playbeat version are you using? Also, do you have a ‘loop’ enabled in Logic? ---
**Author:** ![inkyblackness](https://avatars.discourse-cdn.com/v4/letter/i/8491ac/32.png) [@inkyblackness](https://forum.audiomodern.com/u/inkyblackness)\ **Post date:** [November 2, 2022, 3:38pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/11 "2022-11-02T15:38:59Z")
Thanks for fast response. Would love to nail this issue. I’m using PB3 on Big Sur with Cycle is running. ---
**Author:** ![inkyblackness](https://avatars.discourse-cdn.com/v4/letter/i/8491ac/32.png) [@inkyblackness](https://forum.audiomodern.com/u/inkyblackness)\ **Post date:** [November 2, 2022, 3:43pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/12 "2022-11-02T15:43:09Z")
Using PB3.1.4 to be precise ---
**Author:** ![Audiomodern](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.audiomodern.com/audiomodern/32/3_2.png) [@Audiomodern](https://forum.audiomodern.com/u/Audiomodern)\ **Post date:** [November 2, 2022, 4:37pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/13 "2022-11-02T16:37:03Z")
Have you checked if this is still happening with the latest 3.1.7 version? > **[Latest Software Updates | Audiomodern](https://audiomodern.com/updates/)** > > Download the latest Audiomodern software updates (VST/VST3/AU/AAX/Standalone) ---
**Author:** ![inkyblackness](https://avatars.discourse-cdn.com/v4/letter/i/8491ac/32.png) [@inkyblackness](https://forum.audiomodern.com/u/inkyblackness)\ **Post date:** [November 2, 2022, 4:44pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/14 "2022-11-02T16:44:51Z")
No… but will download now… ---
**Author:** ![inkyblackness](https://avatars.discourse-cdn.com/v4/letter/i/8491ac/32.png) [@inkyblackness](https://forum.audiomodern.com/u/inkyblackness)\ **Post date:** [November 2, 2022, 4:51pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/15 "2022-11-02T16:51:46Z")
OK, using PB 3.1.7 but still one step out. I’ll get back on this later. Thanks 🙂 ---
**Author:** ![inkyblackness](https://avatars.discourse-cdn.com/v4/letter/i/8491ac/32.png) [@inkyblackness](https://forum.audiomodern.com/u/inkyblackness)\ **Post date:** [November 3, 2022, 11:34am UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/16 "2022-11-03T11:34:41Z")
Hi, it’s amazing a reboot can achieve. It’s locked, in sync and working fine now. Thanks for assistance 👌 IAN ---
**Author:** ![Audiomodern](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.audiomodern.com/audiomodern/32/3_2.png) [@Audiomodern](https://forum.audiomodern.com/u/Audiomodern)\ **Post date:** [November 3, 2022, 12:48pm UTC](https://forum.audiomodern.com/t/sequencer-doesnt-start-from-step-1-in-logic-pro-x/189/17 "2022-11-03T12:48:11Z")
Glad to hear that, Enjoy!