# PB4 additional sync mode **URL:** \ **Category:** Feature Requests\ **Tags:** playbeat\ **Created:** [June 22, 2025, 9:10pm UTC](https://forum.audiomodern.com/t/pb4-additional-sync-mode/2839 "2025-06-22T21:10:38Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![tonycore](https://avatars.discourse-cdn.com/v4/letter/t/9fc29f/32.png) [@tonycore](https://forum.audiomodern.com/u/tonycore)\ **Post date:** [June 22, 2025, 9:10pm UTC](https://forum.audiomodern.com/t/pb4-additional-sync-mode/2839/1 "2025-06-22T21:10:38Z")
I would like to be able to trigger PB4 at a particular point in my sequence (say, bar 2 after a count-in bar), but if I do that, when I stop the sequence PB continues to play. If I trigger it with the sequencer start, then it is out of sync if I want it to change every 2 or 4 bars. Is it possible to add a feature for it to begin when triggered, but stop when the sequence stops? Thanks. (This is in Digital Performer, btw) ---
**Author:** ![Audiomodern](https://dub1.discourse-cdn.com/flex013/user_avatar/forum.audiomodern.com/audiomodern/32/3_2.png) [@Audiomodern](https://forum.audiomodern.com/u/Audiomodern)\ **Post date:** [June 24, 2025, 8:07am UTC](https://forum.audiomodern.com/t/pb4-additional-sync-mode/2839/2 "2025-06-24T08:07:42Z")
Hi @tonycore Have you checked this video tutorial about triggering options? [![](https://europe1.discourse-cdn.com/flex013/uploads/audiomodern/original/2X/2/2c759ea035223faa408e7426c4d19accba4b0f62.jpeg "PLAYBEAT 4 by Audiomodern | Trigger Modes") ](https://www.youtube.com/watch?v=jqVjMWEV2pY) ---
**Author:** ![tonycore](https://avatars.discourse-cdn.com/v4/letter/t/9fc29f/32.png) [@tonycore](https://forum.audiomodern.com/u/tonycore)\ **Post date:** [June 24, 2025, 6:04pm UTC](https://forum.audiomodern.com/t/pb4-additional-sync-mode/2839/3 "2025-06-24T18:04:50Z")
Yes, thanks, but it doesn’t quite address what I’d like. So, I am using a workaround of an artificially overextended trigger note.